Home

How Is Piano Tuning Different From Piano Repair?

Piano tuning adjusts string tension so the notes have the correct pitch relationships, while piano repair fixes parts that are broken, worn, loose, or malfunctioning. A piano can need either service or both, and knowing the difference helps you describe problems accurately and schedule the right appointment.

What Piano Tuning Actually Changes

A piano tuner turns tuning pins to adjust the tension of individual strings. Most notes have more than one string, so the technician must bring those strings into agreement as well as establish accurate relationships across the keyboard. The work changes pitch, not the movement of the keys or the condition of the internal parts.

Tuning is not simply setting every note to a fixed reading on a basic electronic tuner. Piano strings produce overtones that are not exact multiples of their lowest frequency, so technicians account for those differences when setting intervals. They may use aural checks, specialized electronic tuning equipment, or a combination of both.

A routine tuning often takes about one to two hours, although the piano’s condition and the technician’s process affect the time required. If the overall pitch has drifted substantially, the piano may need a preliminary pitch adjustment before the fine tuning. That extra work is still pitch correction, not necessarily a repair.

What Counts as Piano Repair

Piano repair addresses a physical problem that prevents a component from working properly. Examples include replacing a broken string, securing a loose part, repairing a damaged action component, or correcting the cause of a sticking key. The action is the mechanism that transfers movement from the keys to the hammers.

A symptom does not always identify the faulty part. A key that stays down might have a clearance problem, a damaged component, or friction somewhere in the mechanism. A technician needs to inspect the piano before deciding what should be adjusted, repaired, or replaced.

Repair time varies much more than tuning time. A small adjustment may be possible during a tuning appointment, while replacing parts or doing work that requires glue to cure may require another visit. Extensive wear can call for substantial action work or rebuilding rather than a quick repair.

A replaced string will also need tuning. New strings commonly lose pitch as they settle, so follow-up adjustments may be necessary even when the installation was done correctly. Replacing the string solves the physical failure; tuning brings it into agreement with the surrounding notes.

How to Tell Which Service Your Piano Needs

Listen separately to pitch and mechanical behavior. Notes that sound sour together generally point toward a tuning need, while keys or pedals that do not function reliably suggest a mechanical issue. These categories can overlap, so describe what happens rather than trying to name the repair.

  • Chords sound out of tune, but every key works: Schedule tuning and mention how long it has been since the last service, if known.
  • A single note sounds wavering or uneven: Its strings may be out of agreement, although a technician should check for other causes if tuning does not resolve it.
  • A key sticks, repeats poorly, or produces no sound: Request an inspection for a mechanical fault or adjustment problem.
  • You hear clicking, rattling, or buzzing: Identify the notes or pedal movements that trigger it so the technician can locate the source.
  • A note keeps sounding after you release the key: Mention a possible damper problem, especially if it happens without the sustain pedal pressed.

Before the appointment, write down the affected notes and whether the problem happens every time. A short recording can help capture an intermittent noise. Avoid taking the mechanism apart or applying household lubricants, which can damage materials or make later service harder.

Where Regulation and Voicing Fit

Some piano problems require neither ordinary tuning nor replacement of a broken part. Regulation adjusts the mechanical relationships within the action and pedal system. It can address uneven key travel, inconsistent hammer movement, or poor repetition when the parts themselves remain serviceable.

Voicing changes tone quality rather than pitch. A technician works on the hammers, often including their shape, condition, and contact with the strings, to address tonal unevenness or an excessively hard or soft sound. A piano that sounds harsh may need tuning, voicing, or both, so an assessment should come before treatment.

These services are related but not interchangeable. Tuning will not correct uneven key depth, and regulation will not bring strings to the proper pitch. Technicians often assess tuning and mechanical condition before recommending voicing because both can affect how the tone is perceived.

What to Request When Booking Service

When booking, state that you want tuning and describe any mechanical symptoms separately. Mention silent notes, sticking keys, pedal trouble, broken strings, or a history of rapid pitch loss. This allows the technician to reserve enough time and determine whether an inspection or repair estimate should come first.

Some repairs should happen before fine tuning. A broken string must be replaced before its pitch can be set, and a tuning pin that cannot hold tension may need attention before stable tuning is possible. Other minor mechanical repairs can be handled independently, depending on the problem and available appointment time.

Ask what the appointment includes, whether repairs require separate authorization, and whether follow-up service is likely. For a piano with several faults, request a prioritized explanation that separates work needed for reliable operation from optional improvements in touch or tone.